Torque and Chrome

Torque wrench? i will be installing a 2" suspension and 1" body lift on my 04 wrangler. within the directions a torque wrench is mentioned. how necessary is a torque wrench when doing this. will i have problems if i don't. can some one give me a link to a good torque wrench the only ones i can find are like 250

Torque Wrench? Can a Ft. Pounds torque be used to tighten something that needs Inch Pounds? like say i need to tighten a bolt 200 inch pounds that would be almost 17 foot pounds is that going to work or do i need the inch pounds torque wrench to do this ?

How to attach a torque wrench to an external bottom bracket? I'm replacing the bottom bracket on my bike with an external one and the instructions advise using a torque wrench to install it. What I don't know how to do is attach the wrench to the bottom bracket so that I can use the torque settings? Can anyone help?

What kind of torque wrench do I use to fix intake manifold on 1992 chevrolet corsica with 3.1L V6? I need to repair my intake manifold on my 1992 chevrolet corsica with a 3.1L V6 engine, but I do not know any of the specs or which kind of torque wrench or wrenches to use. Please help me. There are different sizes of wrenches. Like 1\2, 3/4, etc. which one do I need?

How to use a torque wrench to turn bolts on transmission pan for a Tacoma 2000, 2wd? Is a torque wrench absolutely needed? A regular wrench with correct socket is OK? If a torque wrench is absolutely needed, what are the torque specs for my transmission pan bolts. My vehicle: A Toyota Tacoma, 2000, 2.4 lit, 2wd. Thanks

What is the Difference between a torque wrench and a socket wrench? Are they the same thing? I am putting together a mountain bike that I bought ( just getting into it). The directions say to use a torque wrench. Not all that knowledgeable about hand tools. Trying to get information before buying the wrench.

How much torque to use with a torque wrench? Ok so I'm need to tighten down my valve cover on my Suzuki Samurai with a torque wrench. How much torque do I need? I don't want to over or under tighten it. What do you think? I need quick answers because it's kinda a big problem at the moment.

When you use a torque wrench are you supposed to tighten the bolt until you have reached the right ammount? Or are you supposed to hand tighten and then use the wrench to finish tightening it to the right torque? Thanks

What do the numbers on the handle of a torque wrench mean? On my torque wrench I can see the ft/lbs scale but on the handle that I twist there are numbers that say 0 2 4 6 8. What do these mean? I understand what a ft/lb is, and how to torque a bolt. However, my previous torque (much older one) did not have these numbers on the twistable handle. Ok, got it Ben and N E, thanks a bunch guys.

What is the essential torque wrench for a 05' Ninja 250EX? I need to get a torque wrench for my bike and do not know if a beam wrench is good enough or if I should get a dial wrench. Beam wrenches seem to be around $30ish and the dial ones are $70ish. I also don't know what lb ratings I need to get or whether I should get a 1/2" or 3/4". Any help would be appreciated.

What size of torque wrench do I need to tighten my car's spark plugs to 30 Nm? I've got a cheapo 1/2" Torque wrench, which comes with a 150mm extension bar and a 1/2" to 3/8" converter. My car is a VW Golf made in 2002. Do you think I'll be ok with a 1/2" torque wrench, or will i need the 3/8" adapter... or maybe I need the 1/4" torque wrench? I find it hard to know why there are 3 main sizes of torque wrench. Thanks. Thanks.

How do you adjust a torque wrench? I have torque wrench that has two settings, Nm and MKP (and I have no idea what those mean). There's 2 different sets of reading too: one is around the handle (it's black), and the other is kind of a tree format (the numbers are stacked on top of each other), and that part is above the handle, but goes into the handle when you push it closed. I already know how to convert ft-lbs, into Nm, but I don't know how to set it. Please help me out!

Where can I find an inch/lb torque wrench that is fairly inexpensive? I need a inch/lb torque wrench (not a ft/lb torque wrench) for a one time job. I have found a few but they are way over $100. Any ideas?

What does it mean to pull on click style torque wrench squarely? Does this mean to only pull on the torque wrench handle at a 90 degree angle to the wrench square drive axis, rather then applying an inward or outward force?

torque wrench?

do we need to use the torque wrench to tight the spark plugs? hello folks.. its regarding my 01 max and i have never changed the spark plugs on my car by myself, but i did changed the coils so i know how to get to the plugs etc, my question is..do i need to buy a torque wrench to tight the plugs or i can just use the rachet and hand tight them? please help me cuz i am on the way of getting this done today.

How big a torque wrench will I need to properly torque down the heads on my 302 Ford? That's about the most torque I'll ever need, and that will be in the future. Right now I'm looking at two torque wrenches. The smaller one will be handier for what I'm doing, but it only torques to 80 ft.-lbs. The larger one goes to 150.

Do I need a torque wrench to change the disc and pads? Hi got to change the rear discs and pads on my 02 vauxhall vetca 2.0dti hatchback in the haynes manual it gives torque wrench settings but no where in the list of things to do does it say use a torque wrench to tighten bolts etc. Advise from someone in the know please. Cheers.

is it really necessary to torque wrench the wheel nuts? Hi, im gonna have a go at changing my tyres this weekend on my bike. Any ideas if you really need to torque wrench the nuts on the wheels? I have seen plenty of people not do it, but I assume you would want the nuts balanced on both sides. Any thoughts, what do you other bikers out there do?

How would I calibrate a Dial Torque Wrench? How would I calibrate a Dial Torque Wrench? This is the Dial type with the round, glass enclosed face with a needle indicator. The indicator is on approx. 76 ft lbs, quite a ways off from zero. I'm hoping there is a way for me to calibrate it myself. I searched the net but couldn't find an answer. Any help would be greatly appreciated!!

Dropped torque wrench, is it still going to be accurate? I have a torque wrench, the one that has a long arm like a pendulum that hows how much torque is used, and havent been really careful with it. Like putting it down a little hard and stuff like that. Is still going to be accurate? This is not for the torque wrench that you set and it clicks btw

How do you take a reading from a torque wrench ? I know that torque wrenches are supposed to allow you to tighten nuts and bolts to certain tightness (torque) - for example some bolts on a car need to be tightened to a set specific torque. I've got a 1/4 - 3/8 torque wrench set... looking at it for the first time.... what bit of it shows the reading of torque... cause I just can't understand it. Mine looks a bit like this : http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230026319466&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT&refitem=230050607986&itemcount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&refwidgettype=cross_promot_widget#ebayphotohosting Also would i need a bigger torque wrench and add-on bits to test/tighten my car's wheel bolts? Thanks (sorry I'm not good with tools but trying to get better) Thank you for your very informative answers. It seems my torque wrench(s) must be quite old... (they are at leat 15 years old and were passed to me from an engineer) as they are solid metal to the bottom with no extra setting area at the base - and the part which turns at the top also doesn't have a setting area... just a "left" marking and a "right" marking.... no markings for newton meters, ft lbs, inch lbs dial indication whatsoever. However thank you for some very informative answers which shall come in useful for when I buy a new torque wrench.

A torque wrench used in the final assembly of cylinder? A torque wrench used in the final assembly of cylinder heads for automobile engines has a process standard deviation of 5.0 lb-ft. The engineers have specified that a process average of 135 lb-ft is desirable. For a simple random sample of 30 nuts that were recently tightened with the torque wrench, the sample mean was 137.0 lb-ft. Construct a 95% confidence interval for the current process mean. Discuss the possibility that the torque wrench may be in need of adjustment to correct the process mean.

Is there such a tool as an open end torque wrench? I need to torque a nut but I can't use a socket. Is there an adapter for the socket-type torque wrench?

Is there a loss of torque when extensions are applied to the socket end of a torque wrench? I work on power plant turbines for a living and have heard many arguments about not using extensions or Universal joints on torque wrenches when torquing bolts. I was wondering if there is hard evidence that agrees with or denies this claim. If this is true, where can I find a table/ chart with the foot lbs. lost by extension?

Where is a good place to have my torque wrench calibrated in Chicago? I have two torque wrenches both snap on one is a really old torqometer and a newer Brutus but i want both of them calibrated where can i have this done in Chicago and how much? or whats a good place to mail them to, to have it done?

Which torque wrench is good for belt work on a car? My boyfriend would like a torque wrench for his car, I want to make sure I get the right one without him knowing. I know one of the things he will be using it for is tightening a belt or perhaps the pulley that goes to the belt, either way its not just for lug nuts etc. any suggestion

Where can i get a 1/4 inch drive torque wrench? Where can i get a 1/4 inch drive torque wrench that is capable of measuring low ft-lbs like in the 5-10 ft-lb range? I have to change my oil pan gasket again because I didn't torque it right last time. Now I have a line of oil going all the way up my driveway - oops.

where is the best place to sell a 1 inch drive torque wrench>? i have a 1 inch drive torque wrench i got for free. i need to sell it cus i have no use for it and it collects dust. its brand new never used. and i need some cash in my pocket. how much should i sell it for and where is the best place to sell it because not many people have one or need one for their personal use.. please help!!!

where to buy an open ended torque wrench? where can i buy an open ended torque wrench capable of 10Nm? thanks Hey BIRD! Neither Lowes or home depot have open ended torque wrenches...so check your info before you throw out a "DUH"....DUH!

lose of torque when using a adapter to on a torque wrench? need to torque head bolts to 75 ft pd but torque wrench is 1/2 inch drive ,socket(10mm hex)is 3/8 socket ok to use adapter? correction allen head sorry and thanks

I have a 160 ft lb torque wrench and I need to torque to 177ft lbs? This is a hub bearing nut on a 2003 4wd Yukon. What should I do to ensure I get the proper torque? I could tighten, torque to 160 and give it a slight tap on the end of a breaker bar with a rubber mallet or something like that? Been told not to overtorque. Any suggestions? Aussie, I was not going to bang on my torque wrench. If I were to do that it would be with a 3/4 rachet or breaker bar.

What exactly would I be paying for in a $200 dollar torque wrench? I've always tightened my drain bolt by feel, but have now decided to invest in a torque wrench. I would never spend 200 dollars on something like this but is there any reason I should spend more than $30? As I've seen wrenches that appear similar to each other ranging that price gap. I understand some higher end models are digital, but many 200 dollar wrenches seem to be exaclty like the 30 dollar ones except for the "Snap-On" label.

I just got a torque wrench, it does not adjust. It just has a beam style meter to tell me how much torque? How would i use this type of torque wrench? I have always used the kind with the adjustment knobs on the end of the handle. When using them i would gradually tighten them little by little to the final torque after they were hand snug. Would this one work the same way? Thank you

GOLF- Is there any difference between a Taylor Made and Cobra torque wrench? Any suggestions if I am unable to obtain a Cobra torque wrench?

Torque wrench for spark plugs? Is a torque wrench necessary for replacing spark plugs? Why does the bolt have to have a specific tightening? What type of torque wrench is recommended for this type of routine?

Can you convert a torque wrench from inch pounds to foot pounds? If I need to torque something to 16 Ft pounds, can I use a torque wrench that measures "inch" pounds? If so, how do I convert that?

Torque wrench for lug nut removal? I recently bought a torque wrench for working with my wheels and tires. I was told that you shouldnt use it to remove lugs after the fact. is that just an "old wives tale"? If I can't use it to remove lugs, since they were impact-wrenched on, what is the best way to get them off? im not sure about the brute strength option, im no world strongman unfortunately.

need a torque wrench to install my new oxigen sensor? I bought a replacement unit for my mazda protege 2000 post cat, oxygen sensor... I the installation notes it says I should thighten it to 35 Ft /lbs... Could I simply adjust this with a normal wrench or is it important to thighten it to the specified torque? If I can just do it with a normal wrench,...is 35ft/lbs a lot or just tight? Thanks

What is "drive" on a torque wrench? I am looking to buy my boyfriend a torque wrench, and in shopping for them I'm finding 3/4" drive and 1/2" drive and so on, but I'm not sure what that means. Please advise! I want something that he can use with different bolt sizes - but I am completely clueless with this type of thing! Thank You!

What is the torque wrench settings for a EL 1998 overhead cam in rocker gear? Does anyone have a manual for this model aswell?

How do you use a dial torque wrench? Has Newton meters and inch pounds. Is it as simple as setting the pointer to the number and stopping when I reach that spot?

Question about a micro torque wrench? I've never used one but I know its supposed to click when I reach the desired torque. My question is, since I've never used it, does it easily adjust to fit different size bolts? Oh ok so you just put sockets in it. Does it have to be for that particular model or could I put any sockets in it?

is there much difference between expensive torque wrench and discount torque wrench? i need fairly "small" torque wrench, just need approx. 30 ft. lbs. of torque, it will be used a couple times a year, should i spend the xtra money, thanks

How do you set a click type torque wrench to the correct setting and what do the numbers 0 - 12 mean? I know you twist the handle to the correct setting but the numbers on the handle part that rotates are a mystery to me

what is the proper torque wrench to buy for a 1997 dodge stratus es I need to know what kind to get? also what is the proper torque the tire nuts should be torqued to?

Where can I find a torque wrench for stainless steel or copper tubing? sometimes several tubes are parallel and within and inch apart (1/4" size) on a manifold.

What are the uses of a torque wrench on lug nuts, what are the recomendations of using a torque wrench on lugs wandering if it is neccesary to use torque wrenches on lug nuts I have always been told it is absoulutley neccesary.

How much torque should an impact wrench have for car maintenance? I am planning on buying an impact wrench for car maintenance. There are many of them out there. How much torque should it have?

What's the difference between a breaker bar and a torque wrench?

Is the Breaker bar the best tool for installing a car or is it the torque wrench? could you give me a reason why it is the correct tool please and thank you

Who makes a reasonably priced, quality, torque wrench ? Specifications: micro-ajusting, 24" long, 1/2" drive, all metal, i.e., no plastic components, range: 10 lb ft - 150 lb ft. Value is the major concern, not price. Snapon makes quality tools. However, they are not a good value, due to their high price. Sears, makes inexpensive tools. However, they are not a good value, due to their limited quality. I have an old, Craftsman torque wrench. It has given me good service over many years, now the adjustment is stuck. I looked at the new Craftsman, torque wrenches. The quality appears to be lacking.

How can I tell if my wheel nuts are tightened to the correct torque when using an impact wrench/rattle gun? Is there any way to set the precise torque that impact wrenches tighten to? If I want to use them to tighten wheel nuts how can I make them tighten to the correct torque?

I need to buy a torque wrench? But, can i use the 1/4" fittings on the end on a 3/8" Wrench?

When using a torque wrench, how will the torque change with a 6" extension? what percentage of torque will be lost??

What is the maximum torque at which an impact wrench gives an impact???? Am planning to use an impact wrench as an air drill at 70 Nm torque...the ultimate torque the impact wrench can produce is 210Nm.Am not sure if i give a continious torque of 50 Nm on the wrench's shaft will it rotate without impacts or what will be the general torque at which the impact starts for the wrench which i have specified

Which is the better 3/8” torque wrench for me... range of 10-80Nm, or one with range of 27-108Nm? I want a 3/8” torque wrench for doing stuff on my car.... Which do you think would be most versatile for most of my auto needs? (I know little about auto mechanics but have been doing some of the easier jobs so far.... and maybe more in the future, excluding timing belt - so am looking for which torque wrench range might offer the best option for most of the easier jobs I might encounter) The one with range of 10-80Nm: http://www.toolsnstuff.co.uk/product_info.php?pName=38%22-SQUARE-DRIVE-10-80-NM-OR-885-708-IN-LB-RATCHET-TORQUE-WRENCH&products_id=8102&osCsid=f518ef2049aa6cadaa616f100bcbb98b Or the one with range of 27-108Nm? http://www.toolsnstuff.co.uk/product_info.php?pName=Torque-Wrench-38%94Sq-Drive&products_id=16454&osCsid=f518ef2049aa6cadaa616f100bcbb98b I realize that neither is an uber precision style Teng, Snap-On ect... cause I just can't afford it tbh. Thanks

What's the difference between a torque wrench and a breaker bar?

Who makes the best electronic torque wrench for the price? Craftsman Snapon Gearwrench Mac Other brand

Where may I obtain servicing, for a thirty-five-year-old, Craftsman torque wrench.? I have had no luck with any of the Sears stores, including "Sears Hardware", or "Sears Servicing". Please Note: The question, has nothing to do with the viability of repair, only where repair may be had. I also thought, all Craftsman hand tools had a lifetime guarantee. However, when I brought it in, for replacement or repair, the store clerk checked the warranty on a new one; it was one year. I realize, now, it doesn't mean, mine only had a one year guarantee.

Does anyone know where I can find the torque wrench settings for a aprilla tuareg rally 125 PLEASE HELP!!!? I have recently bought a Aprilla Tuareg Rally 125cc, (MOTORBIKE) does anyone know where I can find the torque wrench settings from?? I have stripped this bike down to clean it up and know want to put it back together. I have search the web but no luck. Please help!!!!!!! Thank you

how do I convert ft./lb to in./lb on a torque wrench? many car engines call for parts of the cylinder head to be in in/lb and just wondering if there is a way to use my torque wrench that measures in ft/lb instead of paying for another torque wrench

Torque wrench or 24V impact gun? I am going to start doing work on my own car, and to help out i want to invest in some more powerful tools. i know the impact guns are good for tires, but are torque wrenches just as good? and more useful in the long run for things other then tires?

so i buy a torque wrench and I look at this..65N.m (6.5kgf-m,47.0 lb-ft) is this going to be easy? I have no frigging idea what that means. its the rear axel tightening torque. so i buy a cheap torque wrench and is it easy to set then? no I ain't brought one yet. i am preparing in my head. It looks hard. And i did email you.

My husband wants a torque wrench but I know nothing about them it is for working on the cars what should i get

Any one know where I can buy a small star/torque wrench/screwdriver to tighten my Palm handheld? The screws are about the size of screws found in eye glasses. (I stopped by WalMart's eye center tonight, but they didn't have anything that worked.) For some reason, the bottom of my Palm appears to be slightly separated making it hard to use my ear buds.

looking for a boxend, openend 17mm torque wrench.? i'm looking for a torque wrench to get into tight places. the wrench would have provisions to change different size mm heads. is this type of torque wrench available?

where can i rent mechanics tools,whats the stor name?im thinkin to rent a torque wrench just to get the job dn i dont want to go and buy a good torque wrench just to use it once or twice...any help?

If I need to torque something to 16 FT pounds, is it ok to use a torque wrench that begins at 10 ft pounds? What I mean is....I am sure it's ok but since it is so close to the extreme, I thought maybe it wouldn't be very accurate. Like if the range of the torque wrench was 10 Ft pounds to 160 Ft pounds... is it ok to torque something so close to the minimum extreme? Does it lose accuracy th closer you get to the limits?

What is the torque of a bolt on a wrench? What is the torque on a bolt produced by a F = 11 N force exerted perpendicular to a wrench that is l = 26 cm long?

What is the torque on a bolt produced by a wrench? What is the torque on a bolt produced by a F = 18 N force exerted perpendicular to a wrench that is l = 24 cm long, as shown below? Write answer in N*m.

Is it possible to convert inch pounds into foot pounds so I can use the torque wrench I have?

Buying a Torque Wrench? I want to buy my husband a torque wrench for his birthday. He needs one today but he is going to rent one. I was looking on the internet and I have no clue where to start. I see they come in different sizes!? Today he is using it to put in the gasket and retighten the head. He asked me to call auto zone and ask if they rent one and told me no bigger than 1/2 inch. I want him to be able to use it for lots of different things. I think he would mostly use it on the car. So what do I need to look for?

how many pounds should i set my torque wrench at for the installation of fram sure drain oil change valve? in past i just tighten the things on tight considering they are never supposed to come out, but this is a new car and if i want to remove valve someday i don't want to way over tighten, thanks

Where can I buy an inch pound torque wrench? I have tried automotive stores such as Kragens, Autozone, etc. I have also tried department stores such as Home Depot, Sears...

whats the best way to use the Beam Torque Wrench? i dont know how to use it at all,,can some1 tell me how....thank you its without ratchet!!

How do you control the torque on an electric impact wrench? Is it even possible to regulate torque on these? For example if I need to tighten my lug nuts to 90 ft/lbs?

im looking for a torque wrench that also tells degrees that you have turned?

Any reviews on Precision Instruments torque wrenches? Was looking through ebay auctions for wrenches and came across a few of these and was wondering if anyone has had any experience with them. Are they quality tools? How accurate are they? Specifically the Dr. Micrometer Click Torque Wrench.

Calculate the torque produced by a 44 N perpendicular force at the end of a 0.1 m long wrench.? Can someone help me with my physics... 1a.Calculate the torque produced by a 44 N perpendicular force at the end of a 0.1 m long wrench. 1b.Calculate the torque produced by the same 44 N force when a pipe extends the length of the wrench to 0.4 m.

torque wrench? How do they work? and how I use it to apply a specific force.?

How cheap can I get a torque wrench for spark plugs & where ? I live in Doraville, georgia. Atlanta 30340

Torque Wrench-how do you read the set torque? Can you please help me how to read the torque reading for a GENIUS 680600F and GENIUS 480250F I have search the web for a manual, but the websites I visited is not helpfull. If someone can direct me to a proper website or if a PDF version of the manual is available will be appreciated Thank you and God bless

I have no torque wrench to tighten my spark plugs. can i just turn it a half a turn or full turn or what?

what is an air ratchet vs. impact wrench vs. torque wrench? what is an air ratchet and what is it used for compared to a impact wrench and torque wrench

what do you guys think of the (non-brand)name TORQUE WRENCH CLICKER? is it a good item or no? is there any risk on the car?,seller say its a life time Warranty and Exceeds Federal Spec. GGG-W00686C...so what do you think? thank you for your time

Torque Wrench Rental? Would any of you happen to know where I would be able to rent a "certified/calibrated" standard torque wrench? Thanks! I am a contractor and I have an inspector asking to verify an installation with a "certified and calibrated tool." I have an old one that I've always used but he said it isn't good enough. I know that I will likely never need it again, so spending the money to by Snap-On, MAC etc. is out of the question.

where can i find a torque(sp) wrench? just spilled soda on my 360 controller and i need this wrench to open it up and clean it someone please help